Articles in international peer-reviewed journals

Here is a list of publications in international peer-reviewed journals co-authored by PhD students or post-doc researchers fully or partly funded by Labex MMCD, or written together with visiting researchers funded by Labex MMCD (published or accepted as of April 1st, 2023). Open access URLs are provided for recent publications.

2023

  1. Awdi, A., Chateau, C., Chevoir, F., Roux, J.N. and Fall A., (2023), Viscous dissipation in large amplitude oscillatory shear of unsaturated wet granular matter, Journal of Rheology, 67, 365, https://doi-org.extranet.enpc.fr/10.1122/8.0000507
  2. Ceccaldi, M., Langlois , V., Guéguen, M., Grande, D., Vincent-Bonnieu, S., Pitois, O. (2023) Liquid relative permeability through foam-filled porous media: Experiments, Physical Review Fluids, 10.1103/PhysRevFluids.8.024302, open access
  3. Pitois, O., Salamé, A., Khidas, Y., Ceccaldi, M., Langlois, V., Vincent-Bonnieu, S. (2023) Daisy-shaped liquid bridges in foam-filled granular packings, Journal of Colloid and Interface Science, 638 (2023) 552–560,https://doi.org/10.1016/j.jcis.2023.01.127
  4. Régal, X., Cumunel, G.,  Bornert, M.,  Quiertant, M. (2023) Assessment of 2D Digital Image Correlation for Experimental Modal Analysis of Transient Response of Beams Using a Continuous Wavelet Transform Method, Applied Sciences, (in press)

2022

  1. Bonacci, F., Chateau, X. Furst, E. M., Goyon, J. and Lemaître, A. (2022) Yield Stress Aging in Attractive Colloidal Suspensions, Phys. Rev. Lett. 128, 018003 doi: 10.1103/PhysRevLett.128.018003
  2. Dieng, M., Bensifia, M., Borme, J., Florea, I., Abreu, C., Jama, C., Léonard, C., Alpuim, P., Pribat, D., Yassar, A., Bouanis, F. (2022) Wet-Chemical Noncovalent Functionalization of CVD Graphene: Molecular Doping and Its Effect on Electrolyte-Gated Graphene Field-Effect Transistor Characteristics, The Journal of Physical Chemistry C, 126, 9, 4522–4533. (https://doi.org/10.1021/acs.jpcc.1c10737).
  3. Dieng, M., Sankar, S., Ni, P., Florea, I., Alpuim, P., Capasso, A., Yassar, A., Bouanis, F.Z. (2022) Solution-Processed Functionalized Graphene Film Prepared by Vacuum Filtration for Flexible NO2 Sensors, Sensors, 10.3390/s23041831, open access
  4. Gbekou, F. K., Benzarti, K., Boudenne, A., Eddhahak A., Duc, M. (2022) Mechanical and thermophysical properties of cement mortars including bio-based microencapsulated phase change materials. Construction and Building Materials, 2022, 352 (129056), 10.1016/j.conbuildmat.2022.129056 . open access
  5. Ma, X., Maillet, B., Brochard, L., Pitois, O., Sidi-Boulenouar, R., Coussot, P. (2022) Vapor-sorption coupled diffusion in clothes revealed by MRI, Physical Review Applied, 17, 024048, Featured in Physics: https://physics.aps.org/articles/v15/s22
  6. Robin, C., Lorthioir, C., Erman, A.,  Perez, J., Fall, A., Ovarlez, G., Amiel, C., Le Cœur, C. (2022) Adsorption of poly(methacrylic acid) onto differently charged silica nanoparticles and its consequences on particles clustering Colloids and Surfaces A: Physicochemical and Engineering Aspects Volume 638, 5 April 2022, 128287, open access
  7. Robin, C., Lorthioir, C., Fall, A., Ovarlez, G., Amiel, C. (2022) Unexpected Slow Kinetics of Poly(Methacrylic Acid) Phase Separation in the Semi-Dilute Regime. Polymers, 14, 4708. doi.org/10.3390/ polym14214708, open access

2021

  1. Abdallah, Y., Sulem, J. Bornert, M., Ghabezloo, S., Stefanou, I. (2021) Compaction Banding in High-Porosity Carbonate Rocks: 1. Experimental Observations, Journal of Geophysical Research: Solid Earth, 126 (1), doi: 10.1029/2020JB020538, open access
  2. Benfenati, A., Bonacci, F., Bourouina, T., Talbot, H. (2021) Efficient position estimation of 3D fluorescent spherical beads in confocal microscopy via Poisson denoising, Journal of Mathematical Imaging and Vision 63:56–72, doi: 10.1007/s10851-020-00994-1, open access
  3. Brisard, S., Tran, V.P., Sab, K., (2021) Morphology-dependent Hashin–Shtrikman bounds on the effective properties of stress-gradient materials, European Journal of Mechanics – A/Solids, 85, 104072, doi: 10.1016/j.euromechsol.2020.104072, open acccess
  4. Caron, J.F., Demont, L., Ducoulombier, N., Mesnil, R..(2020) 3D printing of mortar with continuous fibres: Principle, properties and potential for application. Automation in Construction, Elsevier, 2021, 129, pp.103806. 10.1016/j.autcon.2021.103806. open access
  5. Demont, L., Ducoulombier, D., Mesnil, R., Caron, J.-F. (2021) Flow-based pultrusion of continuous fibers for cement-based composite material and additive manufacturing: rheological and technological requirements, Composite Structures, 262, 113564, doi: 10.1016/ j.compstruct.2021.113564
  6. Ducoulombier, N., Mesnil, R., Carneau, P., Demont, L., Bessaies-Bey, H., Caron J.F., Roussel, N. (2021) The “Slugs-test” for extrusion-based additive manufacturing: Protocol, analysis and practical limits, Cement and Concrete Composites, 121, 104074, 10.1016/j.cemconcomp.2021.104074
  7. Hun, D. A., Yvonnet, J., Guilleminot, J., Dadda, A., Tang, A. M., Bornert, M. (2021) Desiccation cracking of heterogeneous clayey soil: Experiments, modeling and simulations, Engineering Fracture Mechanics, 258, 108065, https://doi.org/10.1016/j.engfracmech.2021.108065 open access
  8. Nguyen D.M., Caré, S., Courtier-Murias, D., Zhou, M., Coussot, P. (2021) Mechanisms of liquid imbibition in Douglas-fir inferred from 1H nuclear magnetic resonance methods, Holzforschung, 75(3), pp. 225-236, doi: 10.1515/hf-2020-0051, open access
  9. Nguyen, Q.-B., Nguyen, V.-H., Perrot, C., Rios de Anda, A., Renard, E., Naili, S., (2021) Multiscale approach to characterize effective mechanical, hydraulic and acoustic properties of a new bio-based porous material, Materials Today Communications, 26, 101938, doi: 10.1016/j.mtcomm.2020.101938, open access
  10. Nguyen, Q.-B., Vahabi, H., Rios de Anda, A., Versace D-L., Langlois V., Perrot, C., Nguyen, V.-H., Naili, S., Renard, E. (2021) Dual UV-Thermal Curing of Biobased Resorcinol Epoxy Resin-Diatomite Composites with Improved Acoustic Performance and Attractive Flame Retardancy Behavior, Sustain. Chem., 2, 24–48. doi: 10.3390/ suschem2010003, open access
  11. Nguyen, Q.-B., Rios de Anda, A., Versace, D. L. , Langlois, V., Perrot, C., Nguyen, V. H., Naili, S., Renard, E., (2021) Design of macroporous photo-cationically cured resorcinol-based epoxy resins coupled to a solid template technique. Journal of Polymer Research 28, 159 (2021). https://doi.org/10.1007/s10965-021-02517-x, open access
  12. Tellier, X., Boutillier, R., Douthe, C., Baverel, O., Patterns for gridshells with negligible geometrical torsion at nodes (2021) Curved and Layered Structures, 8 (1), pp. 147-156. https://doi.org/10.1515/cls-2021-0014, open access
  13. Tellier, X., Douthe, C., Hauswirth, L., Baverel, O. (2021) Funicularity of conics,  Acta Mechanica, 2021,232(8), 3179-3191, https://doi.org/10.1007/s00707-021-02987-6, open access

2020

  1. Abdallah, Y., Sulem, J., Stefanou, I. (2020) Compaction Banding in High-Porosity Carbonate Rocks: 2. A Gradient-Dependent Plasticity Model, Journal of Geophysical Research: Solid Earth, 125 (12), doi: 10.1029/ 2020JB020610, open access
  2. Bonacci, F., Chateau, X., Furst, E.M., Fusier, J., Goyon, J., Lemaître, A. (2020) Contact and macroscopic ageing in colloidal suspensions, Nature Materials, available online https://rdcu.be/b2phJ, doi: 10.1038/s41563-020-0624-9, open access
  3. Cancès, E., Ehrlacher, V., Legoll, F., Stamm, B., Xiang, S. (2020) An embedded corrector problem for homogenization. Part I: Theory. Multiscale Modeling & Simulation 18(3) pp.1179-1209, doi: 10.1137/18M120035X, open access
  4. Cancès, E., Ehrlacher, V., Legoll, F., Stamm, B., Xiang, S. (2020) An embedded corrector problem for homogenization. Part II: Algorithms and discretization Journal of Computational Physics 407 109254, doi: 10.1016/j.jcp.2020.109254, open access
  5. Cascavita, K., Chouly, F., Ern, A. (2020) Hybrid high-order discretizations combined with Nitsche’s method for Dirichletand Signorini boundary conditions, IMA J. Numer. Anal., 40 pp. 2189-2226, doi: 10.1093/imanum/drz038, open access
  6. Ducoulombier, N., Chateau, C., Bornert, M., Caron, J.-F., Aimedieu, P., Weitkamp, T., Perrin, J., King, A., Scheel, M. (2020), X-ray tomographic observations of microcracking patterns in fibre-reinforced mortar during tension stiffening tests, Strain, 56(6):e12347, doi: 10.1111/str.12347, open access, HAL
  7. Ducoulombier, N., Demont, L., Chateau, C., Bornert, M., Caron, J.-F. (2020) Additive Manufacturing of Anisotropic Concrete: a Flow-Based Pultrusion of Continuous Fibers in a Cementitious Matrix, Procedia Manufacturing 47,1070–1077, doi: 10.1016/j.promfg.2020.04.117, open acces
  8. Favier, E., Nemati, N., Perrot, C. Two-component versus three-component metasolids. Journal of the Acoustical Society of America, Acoustical Society of America, 2020, 148 (5), pp.3065 – 3074. doi: 10.1121/10.0002424⟩. open access
  9. Feneuil, B., Roussel, N., Pitois, O. (2020), Yield stress of aerated cement paste, Cement and Concrete Research, 127, 105922, A3, doi: 10.1016/j.cemconres.2019.105922, open access
  10. Lerouge T., Maillet B., Courtier-Murias D., Grande D., Le Droumaguet B., Pitois O., Coussot P. (2020), Drying of a compressible bi-porous material, Physical Review Applied 13(4), 044061, pp. 1-13, doi: 10.1103/PhysRevApplied.13.044061, open access
  11. Mezhoud S., Monchiet V., Bornert M., Grande D. (2020), Computation of macroscopic permeability of doubly porous media with FFT based numerical homogenization method, European Journal of Mechanics, B Fluids, 83, pp. 141-155, doi: 10.1016/j.euromechflu.2020.04.012, open access
  12. Mezhoud S., Le Droumaguet, B., Aimedieu, P., Monchiet V., Bornert M., Grande D. (2020), Investigation of morphology associated with biporous polymeric materials obtained by the double porogen templating approach, Colloid and Polymer Science, 106, doi: 10.1007/s00396-020-04747-9, open access
  13. Nguyen, Q.-B., Nguyen, N.-H. Rios de Anda, A., Nguyen, V.-H., Versace, D.L., Langlois, V., Naili, S., Renard, E., (2020) Photocurable bulk epoxy resins based on resorcinol derivative through cationic polymerization, Applied Polymer Science, 137:e49051, doi: 10.1002/app.49051, (open access soon)
  14. Penvern, H., Zhou, M., Maillet, B., Courtier-Murias, D., Scheel, M., Perrin, J., Weitkamp, T., Bardet, S., Caré, S., Coussot, P., (2020), How Bound Water Regulates Wood Drying, Physical Review Applied, 14(5), 054051, doi: 10.1103/PhysRevApplied.14.054051, open access
  15. Souguir, S., Brochard, L., Sab, K., (2020), Stress concentration and instabilities in the atomistic process of brittle failure initiation, International Journal of Fracture, Vol. 224, pp. 235–249, doi: 10.1007/s10704-020-00459-x, open access
  16. Tellier, X., Zerhouni, S., Jami, G., Le Pavec, A., Lenart, T., Lerouge, M., Leduc, N., Douthe, C., Hauswirth, L., Baverel, O. (2020) The Caravel heX-Mesh pavilion, illustration of a new strategy for gridshell rationalization, SN Applied Sciences, 2(4), 781, doi: 10.1007/s42452-020-2561-2, open access
  17. Tellier, X., Douthe, C., Hauswirth, L., Baverel, O. (2020) Linear-Weingarten membranes with funicular boundaries, Structural Concrete, 21(6), pp. 2293-2306, doi: 10.1002/suco.202000030, open access
  18. Tellier, X., Douthe, C., Hauswirth, L., Baverel, O. (2020) Caravel meshes: A new geometrical strategy to rationalize curved envelopes, Structures, 28, pp. 1210-1228, doi: 10.1016/j.istruc.2020.09.033, open access

 2019

  1. Bouanis F., Moutoussamy P., Florea I., Dominique N., Chaussadent T. and Pribat D., (2019), Graphene nanoplatelets coating for corrosion protection of aluminum substrates, Corrosion, 75(7) p. 799-808, https://doi.org/10.5006/2960, open access
  2. Bourgeois, N., Cenedese, P., Crivello, J.-C., Joubert, J.-M. (2019) Pd–H and Ni–H phase diagrams using cluster variation method and Monte Carlo simulation, Philosophical Magazine 99(19), pp. 2376-2392, doi: 10.1080/14786435.2019.1628367, open access
  3. G. Bracq, M. Laurent-Broc, C. Varvenne, L. Perrière, W.A. Curtin, J.-M. Joubert, I. Guillot (2019) Combining experiments and modeling to explore the solid solution strengthening of high and medium entropy alloys, Acta Materialia, 177: 266-279, doi: 10.1016/j.actamat.2019.06.050, open access
  4. Feneuil, B., Roussel, N. and Pitois, O. (2019) Optimal cement paste yield stress for the production of stable cement foams, Cement and Concrete Research, 120, 142-151, dos: 10.1016/j.cemconres.2019.03.002, open access
  5. Feneuil, B., Aimedieu, P., Scheel, M., Perrin, J., Roussel, N., Pitois, O. (2019) Stability criterion for fresh cement foams, Cement and Concrete Research, 125, 105865, doi: 10.1016/j.cemconres.2019.105865, open access
  6. Gorbushin N., Nguyen V.H., Parnell W.J., Assier R.C., Naili S. (2019), Transient thermal boundary value problems in the half-space with mixed convective boundary conditions. J. Eng. Math., Vol.114, Issue 1, pp 141–158, dos: 10.1007/s10665-019-09986-6, open access
  7. Gorbushin N., Naili S., Nguyen V.H., (2019), Optimizing microstructure of a poroelastic layer with cylindrical pores for absorption properties. Mechanics Research Communications, Vol.102, 103442, dos: 10.1016/j.mechrescom.2019.103422, (open access soon)
  8. Gorbushin N., Nguyen V.-H., Naili S. (2019), Design optimisation of acoustic absorbers with cross-like pores via a homogenisation method. Acta Acustica united with Acustica, Vol.105, 638-649, dos: 10.3813/AAA.919344, (open access soon)
  9. Hun D.A., Guilleminot J., Yvonnet J., Bornert M., (2019) Stochastic Multi-Scale Modeling of Crack Propagation in Random Heterogeneous Media, International Journal for Numerical Methods in Engineering, 119, 1325-1344, dos: 10.1002/nme.6093 [Acknowledgement to Labex MMCD is missing], open access
  10. Lavazec D., Cumunel G., Duhamel D., Soize C. (2019) Experimental evaluation and model of a nonlinear absorber for vibration attenuation, Communications In Nonlinear Science And Numerical Simulation, Volume 69, pp. 386-397, doi: 10.1016/j.cnsns.2018.10.009, open access
  11. Le V.H.T., Brisard S., Pouya A., (2019), Debonding of a circular inclusion: asymmetric propagation of a pair of cracks, International Journal of Solids and Structures, 167, 71-78 (https://hal-enpc.archives-ouvertes.fr/hal-02067332, doi: 10.1016/j.ijsolstr.2019.03.004), open access
  12. Monchiet, V., Ly, H.B., Grande, D. (2019) Macroscopic permeability of doubly porous materials with cylindrical and spherical macropores, Meccanica 54:1583-1596, doi: 10.1007/s11012-019-01023-1
  13. Nguyen, V.-T., Wu, N., Gan, Y., Pereira, J.-M. & Tang, A. M. (2019) Long-Term Thermo-Mechanical Behaviour of Energy Pile in Clay. Environmental Geotechnics 1–40 doi:10.1680/jenge.17.00106, open access
  14. Tellier, X., Douthe, C., Hauswirth, L., Baverel, O. (2019) Surfaces with planar curvature lines: Discretization, generation and application to the rationalization of curved architectural envelopes, Automation in Construction, 106, 102880, doi: 10.1016/j.autcon.2019.102880, open access
  15. Vo, V. S., Mahouche-Chergui, S., Nguyen, V. H., Naili, S., Carbonnier, B. (2019). Crucial Role of Covalent Surface Functionalization of Clay Nanofillers on Improvement of the Mechanical Properties of Bioepoxy Resin. ACS Sustainable Chemistry & Engineering, 7, 15211-15220. doi: 10.1021/acssuschemeng.9b02088
  16. Wang, Z., Chauhan, K., Pereira, J.-M. & Gan, Y. (2019) Disorder characterization of porous media and its effect on fluid displacement. Physical Review Fluids 4, 034305. doi: 10.1103/PhysRevFluids.4.034305, open access
  17. Xu, Y., Vincent, S., He, Q.-C., Le-Quang, H., (2019). Spread and recoil of liquid droplets impacting on solid surfaces with various wetting properties. Surface & Coating Technologies 357, 140-152, doi: 10.1016/j.surfcoat.2018.09.079
  18. V.A. Yartys, M.V. Lototskyy, E. Akiba, R. Albert, V.E. Antonov, J.R. Ares, M. Baricco, N. Bourgeois, C.E. Buckley,J.M. Bellosta von Colbe, J.-C. Crivello, F. Cuevas, R.V. Denys, M. Dornheim, M. Felderhoff, D.M. Grant, B.C. Hauback, T.D. Humphries, I. Jacob, T.R. Jensen, P.E. de Jongh, J.-M. Joubert, M.A. Kuzovnikov, M. Latroche, M. Paskevicius, L. Pasquini, L. Popilevsky, V.M. Skripnyuk, E. Rabkin, M.V. Sofianos, A. Stuart, G. Walker, Hui Wang, C.J. Webb, Min Zhu, (2019) Magnesium based materials for hydrogen based energy storage: Past, present and future, International Journal of Hydrogen Energy, 44, 7809-7859 doi: 10.1016/j.ijhydene.2018.12.212, open access
  19. Zhou M., Caré S., King A., Courtier-Murias D., Rodts S., Gerber G., Aimedieu P., Bonnet M., Bornert M., Coussot P. (2019) Wetting enhanced by water adsorption in hygroscopic plantlike materials, Phys. Rev. Research 1, 033190, doi: 10.1103/PhysRevResearch.1.033190, open access

2018

  1. Bahafid S., Ghabezloo S, Faure P, Duc M. and Sulem J (2018) Effect of the hydration temperature on the pore structure of cement paste: Experimental investigation and micromechanical modelling, Cement and Concrete Research, doi: 10.1016/j.cemconres.2018.06.014, A2
  2. Bourgeois, N., Crivello, J.-C., Cenedese, P., Paul-Boncour Valérie and Joubert, J. M. (2018) Vibration analysis of hydrogen, deuterium and tritium in metals: consequences on the isotope effect. Journal of Physics: Condensed Matter, doi: 10.1088/1361-648X/aad259.
  3. Brochard L., Soughir S. and Sab K. (2018) Scaling of brittle failure: strength versus toughness International Journal on Fracture, Vol. 210, Issue 1–2, pp 153–166
  4. Cascavita K.L., Bleyer J., Chateau X., and Ern A. (2018) Hybrid discretization methods with adaptive yield surface detection for Bingham pipe flows. Journal of Scientific Computation, accepted. DOI 10.1007/s10915-018-0745-3, https://hal.archives-ouvertes.fr/hal-01698983
  5.  Chateau C., Nguyen T.T., Bornert M., Yvonnet J. (2018) DVC-based image subtraction to detect microcracking in lightweight concrete, Strain, 54:5, http://dx.doi.org/10.1111/str.12276,
  6. Favier E., Nemati N., Perrot C. and He Q.-C. (2018) Generalized analytic model for rotational and anisotropic metasolids, J. Phys. Commun. 2 035035
  7. Kodjo K.-M., Yvonnet J., Karkri M. and Sab K., (2018) Multiscale modeling of the thermomechanical behavior in heterogeneous media embedding Phase Change Materials particles, Journal of Computational Physics, 378(1): 303-323
  8. Lerouge T., Pitois O., Grande D., Le Droumaguet B. and Coussot P., (2018), Synergistic actions of mixed small and large pores for capillary absorption through biporous polymeric materials, Soft Matter, 14, 8137-8146
  9. Rodi, E.G., Langlois, V., Renard, E., Sansalone, V., Lemaire, T. (2018) Biocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) and Miscanthus giganteus fibers with improved fiber/matrix interface, Polymers 10(5) 509
  10. Tran V.P., Brisard S., Guilleminot J. and Sab K. (2018) Mori–Tanaka estimates of the effective elastic properties of stress-gradient composites International Journal of Solids and Structures, 146, 55-68. hal-01740741
  11. Vo, V.-S., Nguyen, V.-H., Mahouche-Chergui, S., Carbonnier, B., Naili, S.; (2018) Estimation of effective elastic properties of polymer/clay nanocomposites: A parametric study, Composites Part B, 152, 139-150
  12. Zhang X., Fadoul O., Lorenceau E. and Coussot P. (2018) Yielding and flow of soft-jammed systems in elongation, Physical Review Letters, 120, 048001
  13. Zhang X., Lorenceau E., Bourouina T., Basset P., Oerther T., Ferrari M., Rouyer F., Goyon J., and Coussot P. (2018) Wall slip mechanisms in direct and inverse emulsions, Journal of Rheology 62, 1495, https://doi-org.extranet.enpc.fr/10.1122/1.5046893
  14. Zhou M., Caré S., Courtier-Murias D., Faure P., Rodts S., Coussot P. (2018) Magnetic resonance imaging evidences of the impact of water sorption on hardwood capillary imbibition dynamics , Wood Science and Technology, doi: 10.1007/s00226-018-1017-y

2017

  1. Bahafid S., Ghabezloo S., Duc, M., Faure P., Sulem J. (2017) Effect of the hydration temperature on the microstructure of Class G cement: C-S-H composition and density, Cement and Concrete Research, doi 10.1016/j.cemconres.2017.02.008
  2. Bourgeois N., Crivello J.-C., Cenedese P/ and Joiubert J.-M., (2017) Systematic First-Principles Study of Binary Metal Hydrides, ACS Combinatorial Science, 19, 513−523
  3. Bracq, G., Laurent-Brocq, M., Perriere, L., Pires, R., Joubert, J.-M. and Guillot, I., (2017), The fcc solid solution stability in the Co-Cr-Fe-Mn-Ni multi-component system, Acta Materialia, 128, 327-336
  4. Feneuil, B., Pitois, O. and Roussel, N. (2017), Effect of surfactants on the yield stress of cement paste, Cement and Concrete Research, 100, 32–39
  5. Khalili, M.H., Brisard, S., Bornert, M., Aimedieu, P., Pereira, J.-M., Roux, J.-N. (2017), Discrete Digital Projections Correlation: a reconstruction-free method to quantify local kinematics in granular media by X-ray tomography, Experimental Mechanics, 57:6, 819-830, hal-01474701
  6. Khalili, M. H., Roux, J.-N., Pereira, J.-M., Brisard, S., Bornert, M. (2017), A numerical study of one-dimensional compression of granular materials: I. Stress-strain behavior, microstructure and irreversibility, Physical Review E, 95:032907,hal-01497636
  7. Khalili, M. H., Roux, J.-N., Pereira, J.-M., Brisard, S., Bornert, M. (2017), A numerical study of one-dimensional compression of granular materials: II. Elastic moduli, stresses and microstructure, Physical Review E, 95:032908, hal-01497638
  8. Laborie, B., Rouyer, F., Angelescu, D. E. and Lorenceau, E., Yield-stress fluid deposition in circular channels, Journal of Fluids Mechanics, vol 818, pp 838-851
  9. Ly H.B. , Poupart R., Carbonnier B., Monchiet V., Le Droumaguet B., Grande , D. (2017), Versatile functionalization platform of biporous poly(2-hydroxyethyl methacrylate)-based materials: Application in heterogeneous supported catalysis, Reactive and Functional Polymers, 121, pp 91–100
  10. Mangeon C., Samain X., Rodi E.G., Dessauw E., Sansalone V., Lemaire T., Renard E., Langlois V. (2017) Effet de la modification chimique des fibres végétales sur les propriétés des biocomposites biosourcés. Revue des composites et des matériaux avancés, 27 (1-2), 11-30.
  11. Nassar, H., Lebée, A. and Monasse, L. (2017), Curvature, metric and parametrization of origami tessellations: Theory and application to the eggbox pattern, Proceedings of the Royal Society A, 473: 2197, doi:10.1098/rspa.2016.0705, hal-01368009.
  12. Nguyen T.T., Yvonnet J., Bornert M., Chateau C., Bilteryst F. and Steib E. (2017) Large-scale simulations of quasi-brittle microcracking in realistic highly heterogeneous microstructures obtained from micro CT imaging, Extreme Mechanics Letters, 17 50–55
  13. Robin C., Lorthioir C, Amiel C., Fall A., Ovarlez G. Le Cœur C., (2017) Unexpected Rheological Behavior of Concentrated Poly(methacrylic acid) Aqueous Solutions, Macromolecules, 50 (2), pp 700–710
  14. Shahrokhi M. and Leonard C. (2017) Tuning the band gap and optical spectra of silicon-doped graphene: Many-body effects and excitonic states. Journal of Alloys and Compounds, 693 1185-1196
  15. Vo V.S., Nguyen V.H., Mahouche-Chergui S., Carbonnier B., Di Tommaso D., Naili S. (2017) From atomistic structure to thermodynamics and mechanical properties of epoxy/clay nanocomposites: Investigation by molecular dynamics simulations, Computational Materials Science, 139, 191–201
  16. Xia L., Yvonnet J. and Ghabezloo S. (2017) Phase field modeling of hydraulic fracturing with interfacial damage in highly heterogeneous fluid-saturated porous media, Engineering Fracture Mechanics, 186, pp 158–180, hal-01614404
  17. Zhang X., Lorenceau E., Basset P., Bourouina T., Rouyer F., Goyon J. and Coussot P. (2017) Wall slip of soft-jammed systems: a generic simple shear process, Physical Review Letters, 119, 208004

2016

  1. Brochard, L., Tejada, I. G. and Sab, K. (2016), From yield to fracture, failure initiation captured by molecular simulation, Journal of the Mechanics and Physics of Solids, 95:632-646 DOI: 10.1016/j.jmps.2016.05.005.
  2. Gea Rodi, Erica; Mangeon, Carine; Dessauw, Etienne; Sansalone, Vittorio; Lemaire, Thibault; Renard, Estelle; Langlois, Valérie, (2016) Functionalization of Miscanthus by photo-activated thiol-ene addition to improve interfacial adhesion with polycaprolactone, ACS Sustainable Chemistry & Engineering, 2016, 4 (10), pp 5475–5482.
  3. Houanoh K., Yin, H.-P. and He, Q.-C. (2016) A simple numerical approach for solving the frictionless contact problem of elastic wavy surfaces. Meccanica (2016) 51:463–473
  4. Houanoh, Karim, Yin, Hai-Ping, Cesbron, Julien and He, Qi-Chang (2016), Influence of the in-plan distribution of asperities on the normal contact of periodically rough surfaces, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230, 1382-1391.
  5. Lavazec D., Cumunel G., Duhamel D., Soize C., Batou A., (2016) Nonlinear Microstructured Material to Reduce Noise and Vibrations at Low Frequencies, Journal of Physics : Conference Series, 744(1), 012190.
  6. Laborie, B., Rouyer, F., Angelescu, D. E. and Lorenceau, E. (2016) On the stability of the production of bubbles in yield-stress fluid using flow-focusing and T-junction devices, Phys. Fluids 28, 063103.
  7. Laborie, B., Rouyer, F., Angelescu, D.E., Lorenceau, E. (2016) Yield-stress fluids foams: flow patterns and controlled production in T-junction and flow-focusing devices, Soft Matter, Volume 12, Issue 46, 2016, Pages 9355-9363
  8. Le Bris, C., Legoll, F., and Minvielle, W., (2016), Special Quasirandom Structures: a selection approach for stochastic homogenization, Monte Carlo Methods and Applications, 22 (1), 25-54. (HAL preprint 01194480).
  9. H.B. Ly, B. Le Droumaguet, V. Monchiet, D. Grande, (2016), Tailoring doubly porous poly(2-hydroxyethyl methacrylate)-based materials via thermally induced phase separation, Polymer, 86, 138-146.
  10. H.B. Ly, V. Monchiet, D. Grande, (2016), Computation of permeability with Fast Fourier Transform from 3-D digital images of porous microstructures, International Journal of Numerical Methods for Heat and Fluid Flow, 26, 1328-1345.
  11. H.B. Ly, R. Poupart, L. Halbardier, D. Grande, (2016), Functionalized doubly porous networks: from synthesis to application in heterogeneous catalysis, Macromolecular Symposia, 365, 40-48 (2016).
  12. H.B. Ly, L. Halbardier, D. Grande, (2016), Biporous crosslinked polymers with controlled pore size and connectivity, Macromolecular Symposia, 365, 49-58 (2016)
  13. Masson, Y., and Monasse, L., (2016), Existence of global Chebyshev nets on surfaces of absolute Gaussian curvature less than 2pi, Journal of Geometry, doi:10.1007/s00022-016-0319-1, hal-01233113
  14. T.T. Nguyen, J. Yvonnet, Q.-Z. Zhu, M. Bornert, C. Chateau (2016), A phase-field method for computational modeling of interfacial damage interacting with crack propagation in realistic microstructures obtained by microtomography, Computer Methods in Applied Mechanics and Engineering, accepted. doi:10.1016/j.cma.2015.10.007
  15. T.T. Nguyen, J. Yvonnet, Q.-Z. Zhu, M. Bornert, C. Chateau (2016), Initiation and propagation of complex 3D networks of cracks in heterogeneous quasi-brittle materials: direct comparison between in situ testing- microCT experiments and phase field simulations, Journal of the Mechanics and Physics of Solids, 95:320-350.
  16. T.T. Nguyen, J. Yvonnet, M. Bornert, C. Chateau, K. Sab, R. Romani, R. Le Roy (2016), On the choice of numerical parameters in the phase field method for simulating crack initiation with experimental validation, International Journal of Fracture, 197(2), 213-226.
  17. Salmi-Mani, H., Ait-Touchente, Z., Lamouri, A., Carbonnier, B., Caron, J.-F., Benzarti K., Chehimi, M. M., (2016) Diazonium salt-based photoiniferter as a new efficient pathway to clay-polymer nanocomposites, RCS Advances 2016, vol. 6 (91), Pages 88126-88134
  18. Shahrokhi, M., Léonard. C. (2016) Quasi-particle energies and optical excitations of wurtzite BeO and its nanosheet. Journal of Alloys and Compounds, 682 (15), pp.254-262.
  19. Tejada, I. G., Brochard, L., Lelièvre, T., Stoltz, G., Legoll, F., and Cancès, E., (2016) Coupling a reactive potential with a harmonic approximation for atomistic simulations of material failure, Computer Methods in Applied Mechanics and Engineering, 305, 422–440. hal-01196505
  20. Tran, V.P., Guilleminot, J., Brisard, S., Sab, K., (2016) Stochastic modeling of mesoscopic elasticity random field, Mechanics of Materials, 93, 1-12, hal-01226337
  21. Vo, V.-S., Mahouche-Chergui, S., Babinot, J., Nguyen, V.-H., Naili, S., (2016) Carbonnier, B., Photo-induced SI-ATRP for the synthesis of photoclickable intercalated clay nanofillers, RSC Advances, 6, 89322-89327

2015

  1. E. Bernard, C. Houriez, A. Mitrushchenkov, M. Guitou and G. Chambaud, (2015) Spectroscopy of H2 physisorbed on a Cu(100) surface, Journal of Chemical Physics, 142(5), 054703, DOI: 10.1063/1.4907013
  2. Bourgeois, N., Crivello, J. C., Saengdeejing, A., Chen, Y., Cenedese, P., and Joubert, J. M. (2015) Thermodynamic Modeling of the Ni–H System. The Journal of Physical Chemistry C, 119, 24546-24557.
  3. Boussouf, K., Boulmene, R., Prakash, M., Komiha, N., Taleb, M., Mogren Al-Mogren, M., and M. Hochlaf, (2015), Characterization of the Znq+-imidazole (q = 0, 1, 2) organometallic complexes: DFTs vs. standard and explicitly correlated post Hartree-Fock methods, Phys. Chem. Chem. Phys. 17, 14417.
  4. Boussouf, K., Khairat, T., Prakash, M., Komiha, N., Chambaud, G., and Hochlaf, M., (2015), Structure, Spectroscopy and Bonding within the Znq+-Imidazolen (q = 0, 1, 2; n = 1 – 4) Clusters and Implications for ZIFs and Zn-Enzymes, J. Phys. Chem. A 119, 11928.
  5. Crivello, J. C., Souques, R., Breidi, A., Bourgeois, N. and Joubert, J. M. (2015) ZenGen, a tool to generate ordered configurations for systematic first-principles calculations: The Cr–Mo–Ni–Re system as a case study. Calphad, 51, 233-240.
  6. Dalbouha, S., Prakash, M., Timón, V., Komiha, N., Hochlaf, M., and Senent, M. L., (2015), Explicitly correlated interaction potential energy profile of Imidazole+CO2 complex, Theo. Chem. Acc. 134, 63.
  7. B. Laborie, F. Rouyer, D. E. Angelescu, and E. Lorenceau (2015)  Bubble Formation in Yield Stress Fluids Using Flow-Focusing and T-Junction Devices, Physical Review Letters, 114(20), 204501 https://hal.archives-ouvertes.fr/hal-01158022/
  8. Legoll, F., and Minvielle, W., (2015), A control variate approach based on a defect-type theory for variance reduction in stochastic homogenization, SIAM Multiscale Modeling and Simulation, 13 (2), 519-550 (HAL preprint 01053459).
  9. Legoll, F., and Minvielle, W., (2015), Variance reduction using antithetic variables for a nonlinear convex stochastic homogenization problem, Discrete and Continuous Dynamical Systems – S, 8 (1), 1-27 (HAL preprint 00784187).
  10. Legoll, F., Minvielle, W., Obliger, A. and Simon, M., (2015), A parameter identification problem in stochastic homogenization, ESAIM Proceedings, 48, 190-214 (HAL preprint 00942730).
  11. H.B. Ly, B. Le Droumaguet, V. Monchiet, D. Grande, (2015), Designing and modeling doubly porous polymeric materials, The European Physical Journal Special Topics, 224, 1689-1706.
  12. H.B. Ly, B. Le Droumaguet, V. Monchiet, D. Grande, (2015), Facile fabrication of doubly porous polymeric materials with controlled nano- and macro-porosity, Polymer, 78, 13-21.
  13. T.T. Nguyen, J. Yvonnet, Q.-Z. Zhu, M. Bornert C. Chateau, (2015) A phase field method to simulate crack nucleation and propagation in strongly heterogeneous materials from direct imaging of their microstructure, Engineering Fracture Mechanics, 139:18-39.
  14. Timon, V., Senent, M.L., Hochlaf, M., (2015), Structural single and multiple molecular adsorption of CO2 and H2O in zeolitic imidazolate framework (ZIF) crystals, Microporous and Mesoporous Materials, 218, 33-41

2014

  1. B. Le Droumaguet, R. Lacombe, H.B. Ly, B. Carbonnier, D. Grande, (2014), Novel Polymeric Materials with Double Porosity: Synthesis and Characterization, Macromolecular Symposia, 304, 18-27.
  2. B. Le Droumaguet, R. Lacombe, H.B. Ly, M. Guerrouache, B. Carbonnier, D. Grande, (2014), Engineering functional doubly porous PHEMA-based materials, Polymer, 55, 373-379.
  3. Prakash, M., Chambaud, G., Mogren Al-Mogren, M., and Hochlaf, M. (2014), Role of size and shape selectivity in interaction between gold nanoclusters and imidazole: a theoretical study, J. Mol. Mod. 20, 2534.
  4. Prakash, M., Mathivon, K., Benoit, D. M., Chambaud, G., and Hochlaf, M. (2014), Carbon dioxide interaction with isolated imidazole or attached on gold clusters and surface: competition between  H-bond and  stacking interaction, Phys. Chem. Chem. Phys. 16, 12503.
  5. Senent, M. L., Puzzarini, C., Hochlaf., M., Domínguez-Gómez, R., and Carvajal, M. (2014). Theoretical spectroscopic characterization at low temperatures of S-methyl thioformate and O-methyl thioformate. J. Chem. Phys. 141, 104303

Comments are closed